We refer to teaching as “applications programming” and this is one of the strengths of our product. All applications programming for both measurement and defect detection is done through a powerful ...

Our system has 2 basic modes of operation: programming mode and operator mode. In both modes the results are presented in a variety of on-screen formats (scanned image, grey scale image, ...

Yes; limited only by the size of the storage available to the system (local and remote).

Yes – The system can be configured with customer specific defect classes/definitions.

Our software has very unique and powerful features to deal with bow and tilt as well as variations caused by parts that naturally flex due to their design.

Yes. We also provide integration services to allow your system to participate in a larger CFR Part 11 compliant MES.

Inspection is always a trade-off of throughput vs. sensitivity, or accuracy. With human inspection we can define and capture very small defects, but still every so often allow gross defects to ...

Focus, light levels and other optical and motion parameters are all established during applications programming and set each time a program runs. One can also run multiple programs in sequence on ...

Image quality is evaluated primarily by resolution (measured in pixel size) and contrast. The standard pixel size of our systems ranges from 1.75 microns to 3.3 microns and all have 256 ...

Most customers use a standard NPV calculation to evaluate the purchase of our systems. The benefits are typically reduction of the cost of an escape (defect that gets past QA inspection), ...

The minimum required ongoing maintenance costs are calibrations (twice / year) and bulb replacements (monthly). We warranty the system and offer free software upgrades for 12 months. We also offer extended ...